林恆勝教授（Heng-Sheng Lin,Ph.D.）
Last updated: Aug. 2015
美國西北大學（Northwestern University）機械工程博士1992-1998
國立臺灣大學機械工程學士1986-1990
專長
模具設計、金屬成形、磨潤學、IC封裝測試。
業界經歷
金屬工業研究發展中心 金屬成形組 工程師1998-2001
研究計畫
科技部104年度計畫：「電磁鋼板之平面異向性對沖剪斷面品質與殘留應力之影響分析」(計畫編號：MOST 104-2221-E-151-048)
科技部103年度計畫：「以偏心引伸法驗證橢圓再引伸之成形特徵」
(計畫編號：MOST103-2221-E-151-010)
國科會102年度計畫：「以連續模生產微管件之製造系統研發與應用研究(II)」
(計畫編號：NSC102-2221-E-151-011)
國科會101年度計畫：「以連續模生產微管件之製造系統研發與應用研究」
(計畫編號：NSC101-2221-E-151-025)
國科會100年度計畫：「銀靶熱間鍛造晶粒細化之製程改善」
(計畫編號：NSC100-2622-E-151-002-CC3)
國科會99-100年度：「金屬微成形製程及其應用之研究－子計畫三：微旋鍛成形分析與製程應用之研究 」
(計畫編號：NSC99-2221-E-151-070-MY2)
國科會98年度計畫：「金屬微成形製程及其應用之研究－子計畫二：微旋鍛成形分析與製程應用之研究」
(計畫編號：NSC98-2221-E-150-001)
國科會98年度計畫：「內溝紋鰭管之旋壓成形製程改善」
(計畫編號：NSC98-2622-E-150-012-CC3)
國科會97年度計畫：「馬達聯軸器之冷間背壓鍛造模具開發」
(計畫編號：NSC97-2622-E-150-009-CC3)
國科會97年度計畫：「以旋鍛縮徑成形法改善薄管件縮口沖壓之皺褶與破裂缺陷」
(計畫編號：NSC97-2221-E-150-022)
國科會96年度計畫：「管件縮口旋鍛成形模具分析與開發」
(計畫編號：NSC96-2622-E-150-039-CC3)
國科會95年度計畫：「氮氣離子植佈技術之研發與實務應用--子計畫三：異形條鋼之精密抽引成形與離子植入技術研究」
(計畫編號：NSC95-2221-E-150-095)
國科會94年度計畫：「六角螺栓近淨形頂鍛模具開發」
(計畫編號：NSC94-2622-E-218-014-CC3)
國科會93年度計畫：「冷間精抽之不均勻變形對轉移層和潤滑之影響」
(計畫編號：NSC93-2212-E-218-006)
國科會92年度計畫：「複動化壓縮引伸法於沖鍛複合成形之模具開發」
(計畫編號：NSC92-2622-E-218-012-CC3)
國科會91年度計畫：「板材件孔凸緣成形之軸壁增厚及直角化技術開發」
(計畫編號：NSC91-2622-E-218-003-CC3)
國科會102年度大專學生研究計畫計畫：不銹鋼料理杯內仁導流板之引伸製程改善」柯俊亦(計畫編號：102-2815-C-151-013-E)
國科會100年度大專學生研究計畫計畫：「金屬濺鍍靶材之預成形鍛造模具設計」施勇志(計畫編號：100-2815-C-151-002-E)
國科會94年度大專學生研究計畫計畫：「太陽塔溫室發電之模型製作」劉俊成(計畫編號：94-2815-C-218 -006 -E)
101年建教合作：漢育「林恆勝老師擔任漢育公司專業技術諮詢顧問產學計畫」(101A6164，2012-08-01 ~ 2013-07-30，金額24萬)
101年建教合作：駐龍「車用多變異型鈑件之連續模具工法設計與分析」(101A6058，2012-02-01 ~ 2013-01-31，金額20萬)
101年建教合作：金宏新「不鏽鋼料理杯沖壓成形技術輔導」(101A6178，2011-12-01 ~ 2012-11-30)
100年建教合作：瑞利「高強度鋼葉子板沖壓成形分析技術開發」(100A6121，2011-07-01 ~ 2013-06-30，金額150萬)
100年建教合作：智品「傳動及衝壓系統技術輔導」(100A6173，2011-03-16 ~ 2011-11-30)
97年建教合作：「縮口成形支撐機構改善與旋鍛成形可行性評估」(中部科學工業園區創新技術研究發展計畫－元翎精密工業，金額62.5萬)
96年建教合作：「建立管件旋鍛與脹形加工技術」(南部傳統產業科技關懷計畫－學界認養計畫)
95年建教合作：「金屬角隅整緣成形模具設計」(中部精密模具創新研發社群－精密模具創意構想計畫)
94年建教合作：「金屬板材前向與後向複合擠伸成形模具開發」(中部精密模具創新研發社群－精密模具創意構想計畫)
93年建教合作：大龍「DCPD成型技術與設備開發之機器設備開發技術可行性評估－合模系統」
發明專利
林恆勝, 簡有彥, 張俊傑, 簡吉鴻,“平模鍛造成形均勻度之改良方法,” 發明專利案號: I473674號, 專利權期間: 2015年2月21日－2032年5月31日. (NSC100-2622-E-151-002-CC3)
林恆勝, 周金龍, 許源泉, 楊東昇, 董志偉, “以金屬胚料進行角隅整緣成形方法,” 發明專利案號: I306416號, 專利權期間: 2009年2月21日－2026年11月20日. (NSC91-2622-E-218-003-CC3)
林恆勝, 李建佑, 吳家宏, “以金屬板材進行前向或後向擠伸成形凸緣,” 發明專利證書號數: I268186, 專利權期間: 2006年12月11日－2024年8月22日. (NSC92-2622-E-218-012-CC3)
期刊論文
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chou Ke, Effect of bulge formation on strain inhomogeneity in axi-symmetric metal drawing of light reductions, International Journal of Advanced Manufacturing Technology (2015), accept.
Heng-Sheng Lin, Ying-Chieh Lin, Ming-Ru Lee, Effect of Workpiece Thickness and Surface Texturing on the Micro Cupping Tests, Key Engineering Materials Vol. 626 (2015) pp 420-425 doi:10.4028/www.scientific.net/KEM.626.420 (NSC101-2221-E-151-025, EI)
Heng-Sheng Lin, Jian-Min He, An investigation of elliptical redrawing from circular and elliptical cups, Procedia Engineering 81 (2014) 899- 904, DOI: 10.1016/j.proeng.2014.10.115, http://authors.elsevier.com/sd/article/S1877705814013940 (MOST103-2221-E-151-010, EI)
Heng-Sheng Lin, Chung-Ching Lee, Ying-Chieh Lin, Chia-Hsien Li, Micro Rotary Plunge-Swaging of Stainless Pipes, Key Engineering Materials Vols. 622-623 (2014) pp 725-730 doi:10.4028/www.scientific.net/KEM.622-623.725 (NSC99-2221-E-151-070-MY2, EI
Heng-Sheng Lin, Chih-Tsung Su, Horng-Yih Liou, Yuan-Xiao Ye, Wei-Zhong Hong, Ya-Hang Zheng, An investigation of stamping with high-strength-steel sheets for an automotive aftermarket part, Advances in Material and Processing Technologies 2013 Conference, ID 169, Sep. 22-26, 2013, Grand Hotel, Taipei, Taiwan. (submitted to journal of Advanced Materials Research (EI))
Sy-Wei Lo, Tzu-Chun Yang, Heng-Sheng Lin, The lubricity of oil-in-water emulsion in cold strip rolling process under mixed lubrication, Tribology International 66 (2013), pp. 125-133. (SCI)
http://www.sciencedirect.com/science/article/pii/S0301679X13001941
C. Y. Lee, H. S. Lin and H. T. Yau, Using graphic hardware to accelerate pocketing tool-path generation, Applied Mechanics and Materials Vol. 311 (2013) pp 135-140.
Online available since 2013/Feb/27, http://www.scientific.net/AMM.311.135
Heng-Sheng Lin, Chien-Yu Lee, Shi-Jie Chang, The Influence of Process Parameters on Ball Spinning for Grooved-Fin Pipes, Steel Research International, Special Edition: 14th International Conference, (2012), pp. 559-562. (NSC98-2622-E-150-012-CC3, SCI 0.455)
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chou Ke, Evaluation of Strain Inhomogeneity through Strain Components in Axi-symmetric Drawing, Advanced Science Letters, 8, 376-380 (15 April, 2012). ISSN: 1936-6612 (Print): EISSN: 1936-7317 (Online) http://www.ingentaconnect.com/content/asp/asl/2012/00000008/00000001/art00067?token=003610c2405847447b49792f7a31636f3b3a634c7d3375686f23cd
Heng-Sheng Lin, Sheng-Chi Tsai, Yuan-Chuan Hsu, Ming-Che Hsiao, Chia-Chou Ke, Bean-Yin Lee, A Design of Forming Dies for a Manifold of Airbag Inflator, Advanced Materials Research, Vols. 328-330 (2011) pp 849-852. (EI)
Heng-Sheng Lin, Chia-Jung Lin, Yuan-Chuan Hsu, Jing-Herng Lee, Bean-Yin Lee, Yu-Chiang Chen, Feasibility of Sinking with Rotary Swaging for High Pressure Gas Cylinders, Steel Research International, Vol. 81, (2010) No. 9, pp. 576-579. (NSC97-2221-E-150-022, SCI 0.455)
Yang, T-S, Hsu,Y-C, Lin H-S, Chang, S-Y, “A Finite Element Analysis for the Initial Blank’s Shape Design of Sheet Metal in Deep Drawing Process,” Key Engineering Materials, Vols. 364-366, pp. 980-985, 2008. (SCI 0.224)
Yuan-Chuan Hsu, Heng-Sheng Lin, An analysis of the influence of decompression cavity on the cold hobbing processes, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28-1, pp. 55-58, 2008. (EI)
Lin*, H-S, Hsu, Y-C, Keh, C-C, “Inhomogeneous deformation and residual stress in skin-pass axisymmetric drawing,” Journal of Materials Processing Technology 201 (2008) 128-132. (NSC93-2212-E-218-006, SCI 1.570)
Lin*, H-S, Tung, C-W, “An investigation of cold extruding hollow flanged parts from sheet metals,” International Journal of Machine Tools & Manufacture 47 (2007) 2133-2139. (NSC92-2622-E-218-012-CC3, SCI 1.919)
Lin*, H-S, Lee, C-Y, Wu, C-H, “Hole flanging with cold extrusion on sheet metals by FE simulation,” International Journal of Machine Tools & Manufacture 47 (2007) 168-174. (NSC92-2622-E-218-012-CC3, SCI 1.919)
Lin*, H-S, Wu, C-H, “Hole Flanging with Multi-action Extrusion,” Journal of the Chinese Society of Mechanical Engineers, Vol. 26, No. 5, (2005) pp. 565-570. (NSC92-2622-E-218-012-CC3, EI)
Lee, H-T, Lin*, H-S, Lee, C-S, Chen, P-W “Reliability of Sn-Ag-Sb lead-free solder joints,” Materials Science and Engineering A, A 407 (2005) 36-44. (NSC90-2216-E-006-056, SCI 2.101)
Kuo, T-Y, Lin, H-S and Lee, H-T, “The relationship between of fracture behaviors and thermomechanical effects of alloy AA2024 of T3 and T81 temper designations using the center crack tensile test,” Materials Science and Engineering A, A 394 (2005) 28–35. (NSC83-0424-E-006-095, SCI 2.101)
Lin, H-S, Marsault, N., and Wilson, W. R. D., 1998, “A Mixed Lubrication Model for Cold Strip Rolling Part 1: Theoretical,” STLE Tribology Transactions, Volume 41, pp. 317-326. (SCI 0.406)
專書及專書論文
林恆勝, 滿梓芸, 2014, “智慧型模具生產技術,” 出版單位: 社團法人中華民國模具技術發展學會. (ISBN 978-986-90265-2-9)
Lin, H-S, 1998, “A Mixed Lubrication Model for Cold Strip Rolling,” Ph.D. dissertation, Northwestern University, Evanston, Illinois, USA.
國際研討會論文
Heng-Sheng Lin, Jian-Min He, An investigation of elliptical redrawing from circular and elliptical cups, 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan. Also published in Procedia Engineering 81 ( 2014 ) 899- 904. (MOST103-2221-E-151-010, EI)
Heng-Sheng Lin, Chung-Ching Lee, Ying-Chieh Lin, Chia-Hsien Li, Micro Rotary Plunge-Swaging of Stainless Pipes, Metal Forming 2014, Palermo, Italy, Sep. 21-24, 2014. Also published in Key Engineering Materials Vols. 622-623 (2014) pp 725-730. (NSC99-2221-E-151-070-MY2, EI)
Heng-Sheng Lin, Ying-Chieh Lin, Ming-Ru Lee, “Effect of Workpiece Thickness and Surface Texturing on the Micro Cupping Tests,” 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications, Kaohsiung, Taiwan, Sep. 1-5, 2014. Also published in Key Engineering Materials Vol. 626 (2015) pp 420-425. (NSC101-2221-E-151-025, EI)
Heng-Sheng Lin, Chih-Tsung Su, Horng-Yih Liou, Ya-Hang Zheng, An investigation of stamping with high-strength-steel sheets for an automotive aftermarket part, Advances in Material and Processing Technologies 2013 Conference, ID 169, Sep. 22-26, 2013, Grand Hotel, Taipei, Taiwan. (to be published in Advanced Materials Research (EI))
Heng-Sheng Lin, Chien-Yu Lee, Shi-Jie Chang, “The Influence of Process Parameters on Ball Spinning for Grooved-Fin Pipes,” Metal Forming 2012, pp. 559-562, AGH University of Science and Technology, Sep. 16-19, 2012, Kraków, Poland. Also published in Steel Research International, Special Edition: 14th International Conference, (2012), pp. 559-562. (NSC98-2622-E-150-012-CC3, SCI 0.455)
Heng-Sheng Lin, Sheng-Chi Tsai, Yuan-Chuan Hsu, Ming-Che Hsiao, Chia-Chou Ke, Bean-Yin Lee, A Design of Forming Dies for a Manifold of Airbag Inflator, 2011 International Conference on Mechatronics and Materials Processing (ICMMP2011), November 18-20, 2011, Guangzhou, China. Also published in Advanced Materials Research, Vols. 328-330 (2011) pp 849-852. (EI)
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chou Ke, Evaluation of Strain Inhomogeneity through Strain Components in Axi-symmetric Drawing, 1st ICETI-Kenting, Taiwan, November 11-15, 2011. Also published in Advanced Science Letters, 8, 376-380. (15 April, 2012, SCIE)
H.S. Lin, J.J. Chang, Y.C. Hsu, C.C. Ke, G.J. Huang, W.S. Wang, “Upsetting with Conical Dies for Metal Sputtering Targets,” 10th International Conference on Technology of Plasticity, P. 127-132, Aachen, Germany, Sep. 25-30, 2011. (NSC100-2622-E-151-002-CC3)
Heng-Sheng Lin, Chia-Jung Lin, Yuan-Chuan Hsu, Jing-Herng Lee, Bean-Yin Lee, Yu-Chiang Chen, “Feasibility of Sinking with Rotary Swaging for High Pressure Gas Cylinders,” Metal Forming 2010, Hotel Nikko, Toyohashi, Sep. 19-22, 2010, Toyohashi, Japan. Also published in Steel Research International, Vol. 81, (2010) No. 9, pp. 576-579. (SCI 0.455)
Lin, H-S, Hsu, Y-C, Keh, C-C, Process Design of Cold Combination Extrusion for a Motor Coupling, Advances in Material and Processing Technologies 2009 Conference, ID 173, Oct. 26-29, 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia. (NSC97-2622-E-150-009-CC3)
Yuan-Chuan Hsu, Heng-Sheng. Lin, An analysis of the influence of decompression cavity on the cold hobbing processes, The 16th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME 2008, June. 22-25, 2008, Gliwice-Ryn, Poland.
Lin, H-S, Hsu, Y-C, Keh, C-C, Inhomogeneous deformation and residual stress in skin-pass axisymmetric drawing, Advances in Material and Processing Technologies 2007 Conference, Oct 7-11, 2007, KAIST, Daejeon, Korea. Also published in Journal of Materials Processing Technology 201 (2008) 128-132. (NSC93-2212-E-218-006, SCI 1.570)
Hsu, Y-C, Lin, H-S, Yang, T-S, Influences of Cross-sectional Geometry and Surface Roughness on the Compression Stability in Upsetting High Aspect-Ratio Shaped Billets by FE Analysis, Proceedings of IMECE 2006, 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-13840, November 5-10, 2006, Chicago, Illinois, USA.
Lin, H-S, Hsu, Y-C, Lin, S-Y, Shao, S-Y, “Application of Hole Flanging with Counter-pressure: Gear-Shape Forming and Edge sizing,” the 4th JSTP International Seminar on Precision Forging, Nara, Japan, March 21-24, 2006, pp. 135-140. (NSC92-2622-E-218-012-CC3)
Lin, H-S, Wu, C-H, “Hole Flanging with Multi-action Extrusion,” the 9th Asian Symposium on Precision Forging (9th ASPF), Oct. 2-5, Kao-Hsiung, Taiwan, 2005, pp. 565-570. (NSC92-2622-E-218-012-CC3)