Mico and Nano Forming Lab

微奈米成形研究室

ccchang@nkust.edu.tw

© MNFL 2012

學術論文
Publications

(一)期刊論文

C. C. Chang* and J. C. Lin, 2012, Influence of grain size and temperature on micro upsetting of copper, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226, Issue 1, pp.183-190. (SCI, EI)

C. C. Chang*, H. S. Hsiao, 2011, Effects of Temperature and Grain Size on Micro Backward Extrusion of Copper, Steel Research International (Special Edition: 10th International Conference on Technology Plasticity, ICTP 2011), pp. 968-973. (SCI)

C. C. Chang*, 2011, Crossed patch arrangements of linear triangular elements for upper bound finite-element analysis of plane strain deformation problems, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 225, No. 2, pp. 280-291. (SCI, EI)

C. C. Chang* and W. L. Kuo, 2011, Effects of temperature and grain refinement on micro simple upsetting of copper, Key Engineering Materials, Vol. 450, pp. 149-152. (EI)

C. C. Chang*, 2011, Influences of strain rate on copper nanowire in tension, Key Engineering Materials, Vol. 450, pp. 153-156. (EI)

C. C. Chang* and W. L. Kuo, 2010, Effects of temperature and grain refinement on the closed-die forging of a micro gear, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 224(B11), pp. 1767-1773. (SCI, EI)

C. C. Chang* and C. K. Huang, 2010, Preform design for cold forging of micro gear, Steel Research International (Special Edition: Metal Forming 2010), Vol. 81, No. 9, pp. 1209-1212. (SCI, EI)

C. C. Chang*, T. C. Wang, 2010, Effects of grain size on micro backward extrusion of copper, Advanced Materials Research, Vols. 83-86, pp. 1092-1098. (EI)

C. C. Chang*, C. K. Huang, 2010, Effects of surface roughness on tribological characteristics in micro double cup extrusion of aluminum, Key Engineering Materials, Vols. 419-420, pp. 5-8. (EI)

C. C. Chang*, Y. H. Wu, 2005, The effect of forming speed on micro-punched gears, Journal of the Chinese Society of Mechanical Engineers, Vol. 26(5), pp. 603-608. (EI)

V. Lacarac, C. C. Chang, A. N. Bramley*, M. J. Tierney, Chris McMahon and D. J. Smith, 2004, Predictions and Measurements of Residual Stresses from Forging and Heat Treatment, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 218 (3), pp. 301-313. (SCI, EI)

C. C. Chang and A. N. Bramley*, 2003, Determination of the Heat Transfer Coefficient at the Die Interface in Forging, Journal of the Japan Society for Technology in Plasticity, Vol. 44 (507), pp. 360-362.

P. Becker, H. J. Jeon, C. C. Chang and A. N. Bramley*, 2003, A Geometric Approach to Modelling Friction in Metal Forming, Annals of the CIRP, Vol. 52/1, pp. 209-212. (SCI, EI)

C. C. Chang* and A. N. Bramley, 2002, Determination of the Heat Transfer Coefficient at the Workpiece-die Contact Interface for the Forging Process, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 216(8), pp. 1179-1186. (SCI, EI)

C. C. Chang and A. N. Bramley*, 2000, Forging Preform Design Using a Reverse Simulation Approach with the Upper Bound Finite Element Procedure. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 214, pp. 127-136. (SCI, EI)

C. C. Chang, J. C. A. Tildesley, F. Bonnavand, D. J. Mynors and A. N. Bramley, 1999, Forging Simulation - TEUBA: A Fast Preform Design Simulation Package. Metallurgia: The Journal of Metal Technology Metal Forming and Thermal Processing, Vol. 66(3), pp. 27-28.

F. Bonnavand, J. C. A. Tildesley, C. C. Chang, D. J. Mynors* and A. N. Bramley. Forging Simulation -ForgeRond: A Fast Numerical Simulation Package. Forging Technology: The Journal of the Institute of Forging Technology, 1999, 7(1), pp. 4-6.

D. J. Mynors*, J. C. A. Tildesley, F. Bonnavand, C. C. Chang and A. N. Bramley. Forging Simulation: Finite Element Packages. Forging Technology: The Journal of the Institute of Forging Technology, 1998, 6(3), pp. 44-46.

C. C. Chang and A. N. Bramley*, 1998, A New Forging Preform Design Approach Using Reverse Simulation. Annals of the CIRP, Vol. 47/1, pp. 193-196. (EI)

(二)國際研討會論文

C. C. Chang* and D. C. Pang, 2010, Effects of punch blade angle on fabricating micro plastic tags, The 5th International Conference on MicroManufacturing ICOMM/4M 2010, April 5-8, Madison, Wisconsin, USA, pp. 157-160.

C. C. Chang* and J. C. Lin, 2009, Micro bulging processes of copper sheets using viscous pressure media, The 4th International Conference on Tube Hydroforming (TUBEHYDRO 2009), September 6-9, Kaohsiung, Taiwan, pp. 170-175.

C. C. Chang*, W. L. Kuo, 2008, Effects of process parameters on filling of grooves in micro metal imprinting, ICTP 2008 (The 9th International Conference on Technology of Plasticity), 7-11 September, Korea, pp. 1184-1189.

C. C. Chang*, P. B. Nguyen, 2008, Effects of geometric parameters on pin fin height of micro cold extruded heat sinks, The 13th International Conference on Machine Design and Production, 3-5 September, Istanbul, Turkey, pp. 311-324.

C. C. Chang*, J. Y. Lin, J. H. Wu, Y. L. Ho, C. F. Chen, S. R. Chen, and W. H. Wang, 2004, October, A Study of the Thin Film Heat Transfer in a Rapid-Heating Nanoimprint Process, European Micro and Nano Systems 2004, Advances & Applications for Micro & Nano Systems, Paris, pp. 20-21.

C. C. Chang and A. N. Bramley*, 2002, Determination of the Heat Transfer Coefficient at the Die Interface in Forging, The 7th International Conference on Technology of Plasticity (7th ICTP), 27 October – 1 November 2002, Yokohama, Japan, pp. 775-780.

C. C. Chang* and A. N. Bramley, 2001, The Tetrahedral Element Upper Bound Analysis (TEUBA) for Forging Preform Design, The 4th International EASFORM Conference on Material Forming (A.M. Habraken, Volume 2), Liege, Belgium, pp. 537-540.

C. C. Chang* and A. N. Bramley, 2000, Forging Preform Design Using a Reverse Simulation Approach with the Upper Bound Finite Element Procedure, The 2nd JSTP International Seminar on Precision Forging, Osaka, Japan, 15-16 May, pp. 157-162.

H. H. Kwon, C. C. Chang, A. N. Bramley*, 2000, Ceramic Inserts for Forging Tools – Optimizing the Design. In: Proceedings of the Thirty-Third International MATADOR Conference, Springer-Verlag London Limited, 2000 (Editor: David R. Hayhust), pp. 367-372.

C. C. Chang and A. N. Bramley*, 1999, Forging Preform Design Using Reverse Simulation for Plane Strain Application. In: Advances in Manufacturing Technology XIII, Proceedings of the Fifteenth National Conference on Manufacturing Research. University of Bath, 6-8 September 1999 (Editors: A. N. Bramley, A. R. Mileham, L. B. Newnes and G. W. Owen ed.), pp. 93-97.

(三)國內研討會論文

張朝誠*, 顏志憲, 2010, 晶粒尺寸對純銅微U形溝擠製之影響，精密機械與製造科技研討會論文集，屏東, pp. C04-01~07.

張朝誠*, 林劍塵, 2009, 不同介質對純銅板材微型鼓脹製程之影響, 中國機械工程學會第二十六屆全國學術研討會論文集, 製造與設計, 台南, Paper No. D01-022.~07.

張朝誠*, 洪志錡, 2009, 表面粗糙度對微雙溝擠製之影響, 精密機械與製造科技研討會論文集, 微奈米科技與精微成形技術, 高雄, pp. C73-01~C73-06.~07.

張朝誠*, 郭武麓, 2009, 溫度與晶粒尺寸對微齒輪鍛造之影響, 模具暨應用產業技術論文發表會論文集，台北，pp. 7-16.~07.

張朝誠*, 黃建國, 2008, 表面粗糙度對微雙杯擠製之影響, 中國機械工程學會第二十五屆全國學術研討會論文集, 彰化, p. 379, Paper No. C05-20.~07.

張朝誠*, 謝典霖, 2008, 晶粒尺寸對純銅微沖剪之影響, 中國機械工程學會第二十五屆全國學術研討會論文集, 彰化, p. 320, Paper No. D01-03.~07.

張朝誠*, 王騰鉸, 2008, 等徑轉角擠製純銅於逆向擠製微型圓杯之研究, 2008模具技術與論文發表會, 台北, pp. 90-99.~07.

張朝誠*, 陳建宏, 2008, 黃銅微引伸成形加工條件對引伸深度之影響, 2008模具技術與論文發表會, 台北, pp. 100-109.~07.

張朝誠*, 鄭元傑, 2008, 碳化鎢電極微放電加工特性之研究, 2008模具技術與論文發表會, 台北, pp. 312-321.~07.

張朝誠*, 林明宏, 2007, 微衝剪之成形模擬與剪斷面品質之研究, 2007模具技術與論文發表會, 台北, pp. 73-79.~07.

張朝誠*, 蘇裕翔, 2007, 微齒輪鍛造之預形設計與實驗, 2007模具技術與論文發表會, 台北, pp. 65-72.~07.

張朝誠*, 王騰鉸, 2007, 應用等徑轉角擠製細化純銅晶粒暨其機械性質之探討, 2007精密機械與製造技術研討會論文集, 屏東, pp. C20-01~C20-06.~07.

張朝誠*, 林明宏, 2007, 微衝剪破壞之數值模擬與實驗, 2007精密機械與製造技術研討會論文集, 屏東, pp. A31-01~06.~07.

張朝誠*, 蘇裕翔, 2007, 微齒輪鍛造之數值模擬與實驗, 2007精密機械與製造技術研討會論文集, 屏東, pp. A30-01~06.~07.

張朝誠*, 陳鴻展, 2006, 鋁材微壓印技術之初步研究, 第四屆精密機械與製造技術研討會論文集－2006,屏東, pp. A37-1~5.~07.

郭士銘, 張朝誠*, 2006, 微型衝剪加工條件對剪斷面品質之影響, 中國機械工程學會第二十三屆全國學術研討會論文集, 台南, D2-007.~07.

陳鴻展, 張朝誠*, 2006, 單發微放電加工特性之研究, 中國機械工程學會第二十三屆全國學術研討會論文集, 台南, D6-003.~07.